Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
€3.00
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
€1.90
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
4 Items
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
You might also like
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
€5.40
Double satin ribbon, width 6 mm, roll of 50 meters
Double-sided satin tape, width 6 mm, roll of 50 meters
€13.00
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
€1.92
DIY kit, Macrame pendant light, colored wooden beads and white thread, 80 cm long
DIY kit, Macrame pendant light, colored wooden beads and white thread, 80 cm long
€9.50
Set of 5 White metal squares, size 10 cm to 30 cm, Epoxy rings for Dreamcatcher, lampshade
Set of 5 White metal squares, size 10 cm to 30 cm, Epoxy rings for Dreamcatcher, lampshade
€12.50
16 other products in the category
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
€5.00
White polyphane sheet 2 m x 0.40 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€21.90
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings...
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
€19.65
Beige Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Beige Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
€6.20
Lampshade round clip clamp, diameter 8 cm and circle 13 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
€5.50
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for...
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
€52.00
Set of 2 big red metal circles, diam. 60 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 big red metal circles, diam. 60 cm for lampshade, Epoxy rings Dreamcatcher
€17.50
White polyphane sheet 1 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€17.50
Steel grey Metal Circle of 40 cm for Shades, Epoxy Wire matt silver ring for Dream Catcher
Steel grey Metal Circle of 40 cm for Shades, Epoxy Wire matt silver ring for Dream Catcher
€4.60
Set of frames diam. 50cm for lampshade, large round rings epoxy white, for lamp holder...
Set of frames diam. 50cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
€19.00
Set of black frames diam. 60 cm for lampshade, large round rings epoxy black, for lamp...
Set of black frames diam. 60 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
€26.00
Set of 10 white metal circles Diameter 15 cm for lampshade, epoxy wire ring for...
To create dream catchers or for any other use.
Diameter of the thread: 2,6mm
€13.40
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
€2.25
Set of 5 large old gold metal circles Diameter 30 cm to 70 cm for lampshade, epoxy...
Set of 5 large old gold metal circles Diameter 30 cm to 70 cm for lampshade, epoxy rings for Dreamcatcher
€28.00
Big Set of 3 large black metal circles Diameter 90 cm for lampshade, epoxy rings for...
Big Set of 3 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
€70.00
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher