Lot of 10 Copper Pendants, Octagonal, 2 holes, roughing 30 x 12 x 0.8mm, for enamelling

Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!

Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will  help the powder adhere better. Can be diluted if required – dilute and  clean up with water.

Efcolor cooking support, with handle, for 1 piece of 10-50 mm, ø 83 mm

Cooking rack, Efcolor, with handle, for 1 piece 3.5 to 8 cm, ø 84 mm

The 24 opaque enamel colors are sold in powder form.

If you use opaque enamel, the metal surface will no longer appear after firing.

You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.

We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.

Firing temperature 780-850 ° C on copper, silver, gold and iron.

The 24 opaque enamel colors are sold in powder form.

If you use opaque enamel, the metal surface will no longer appear after firing.

If you use, transparent enamel, it will remain clearly visible.

You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.

We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.