Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC.
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven!
Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will help the powder adhere better. Can be diluted if required – dilute and clean up with water.
Lot of 10 Copper pendants, Heart with 1 hole, 30x29 mm, for enamelling
10 Copper Plates Dog 25 x 32 mm, blank 0.8 mm for enamelling
Lot of 10 Copper pendants, little Heart with 1 hole, 1,6 x 1,5 cm, for enamelling
Cooking support with handle, universal, for pieces from 1 to 7 cm, ø 83 mm
Lot of 10 Pendants, copper, Owl, 1 hole, 35 mm blank, for enameling
Lot of 10 Copper Pendants, Octagonal, 2 holes, roughing 30 x 12 x 0.8mm, for enamelling
Lot of 10 Pendants, copper, Key, 48 x 20 mm, Efcolor cold enameled blank
Firing sieve 180 x 120 mm, height 1cm, for high temperature oven
Lot of 10 pendants, copper, diamond, 2 holes, 47 x 16 mm, blank for enamelling
10x Copper Pendant Drop, 1 hole, 53x12 mm x 0.8mm, for enameling
Sanding block, fine grain, 5 x 4 x 2 cm, polishing
Cooking rack, Efcolor, with handle, for 1 piece 3.5 to 8 cm, ø 84 mm
Set of 10 Pendants, copper, Oval, 1 hole, 46 x 6 mm, blank for enameling
10 copper blank oldtimer 31x25 mm, blank thickness 0.8 mm, for enamelling
Cooking grid 8 cm x 7 cm, height 1cm, for high temperature oven
Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
