Set of 2 Copper foil cutouts 100 x 150 mm x 0,1 mm, for enamelling and decorating
Set of 2 Copper foil cutouts 100 x 150 mm x 0,1 mm, for enamelling and decorating
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven!
Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will help the powder adhere better. Can be diluted if required – dilute and clean up with water.
Baking tray with handle, ø 10.6 cm, for glazing
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
Set of 6 blanks, wooden, 15 cm, for modeling clay, terracotta
Copper foil, 300 x 200 x 0.3 mm, for enamelling, decoration, creation
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Copper foil, 300 x 200 x 0.2 mm, for enamelling, decoration, creation
Copper foil, 300 x 200 x 0.1 mm, for enamelling, decoration, creation
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Copper foil, 300 x 200 x 0.3 mm, for enamelling, decoration, creation
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Set of 20 Empty tubes with lid, ø 36 mm high 45 mm, for 25 ml
Stand for backing enamel, Multiple, for enamelling up to 1200 ° C
Copper plate, 150 x 150 x 0.8 mm, for enamelling, decoration, creation
Firing sieve 180 x 120 mm, height 1cm, for high temperature oven
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
Copper foil, 300 x 200 x 0.2 mm, for enamelling, decoration, creation
Copper plate, 150 x 150 x 0.8 mm, for enamelling, decoration, creation
Set of 2 Copper foil cutouts 100 x 150 mm x 0,1 mm, for enamelling and decorating
