Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Set of 10 Copper Pendants, Butterfly 22 x 22 mm, 0.8 mm thick, for enamelling
10x Copper Pendant Leaf, 1 hole, 47x13 mm x 0.8mm, for enameling
Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
Lot of 10 Pendants, copper, Star, 1 hole, 17 x 20 mm, blank for enameling
Lot of 10 Pendants, copper, Dwarf, 1 hole, 34 x 21 mm, blank for enameling
Firing temperature 780-850 ° C on copper, silver, gold and iron.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Set of 10 Copper Pendants, Butterfly 3,8 cm, 0.8 mm thick, for enamelling
Set of 10 Copper Pendants, Windmill 3 x 2,2 cm, 0.8 mm thick, for enamelling
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
Powder against opaque enamel, 45 gr, for baking at 780 ° C-850 ° C
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Copper foil, 300 x 200 x 0.1 mm, for enamelling, decoration, creation
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
