The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Shades in the colors may appear. They are to be attributed to the supports used and to variations in cooking temperatures.
Coral red colors: 1141 cherry red - 1142 cardinal red: 1144 and burgundy: 1150 contain cadmium
Firing temperature 780-850 ° C on copper, silver, gold and iron.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Powder against opaque enamel, 45 gr, for baking at 780 ° C-850 ° C
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
Set of 10 Copper Pendants, Butterfly 3,8 cm, 0.8 mm thick, for enamelling
Set of 10 Copper Pendants, Dragonfly 3,8 x 3,6 cm, 0.8 mm thick, for enamelling
Set of 10 Copper Pendants, Giraffe 4,3 x 1,4 cm, 0.8 mm thick, for enamelling
Set of 10 Copper Pendants, Windmill 3 x 2,2 cm, 0.8 mm thick, for enamelling
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Powder against opaque enamel, 45 gr, for baking at 780 ° C-850 ° C
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
Copper foil, 300 x 200 x 0.1 mm, for enamelling, decoration, creation
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
