Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC.
Enamel powder, cold, opaque Efcolor, 25 ml, for cooking 150 ° C
Enamel powder, cold, Efcolor glitter, 25 ml, for cooking at 150 ° C
Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will help the powder adhere better. Can be diluted if required – dilute and clean up with water.
Cooking grid 8 cm x 7 cm, height 1cm, for high temperature oven
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
Firing temperature 780-850 ° C on copper, silver, gold and iron.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
Sanding block, fine grain, 5 x 4 x 2 cm, polishing
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Copper plate, 150 x 150 x 0.8 mm, for enamelling, decoration, creation
Cooking grid 8 cm x 7 cm, height 1cm, for high temperature oven
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Copper foil, 300 x 200 x 0.2 mm, for enamelling, decoration, creation
Set of 20 Empty tubes with lid, ø 36 mm high 45 mm, for 25 ml
Powder against opaque enamel, 45 gr, for baking at 780 ° C-850 ° C
