This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
Medium fixative for enamels, 50 ml
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Lot of 10 Pendants, copper, Lion, 1 hole, 2,4 cm, blank for enameling
10 copper blank oldtimer 31x25 mm, blank thickness 0.8 mm, for enamelling
Set of 10 Copper Pendants, Butterfly 3,8 cm, 0.8 mm thick, for enamelling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Set of 10 copper pendants Frog 35 x 28 mm, blank thickness 0.8 mm, for enameling
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Set of 10 Copper Pendants, Windmill 3 x 2,2 cm, 0.8 mm thick, for enamelling
Set of 10 Copper Pendants, Pig 2,4 x 1,3 cm, 0.8 mm thick, for enamelling
Set of 10 Copper pendants, Cat 33x33 mm, for enamelling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Set of 10 Copper Pendants, Dragonfly 3,8 x 3,6 cm, 0.8 mm thick, for enamelling
Set of 10 Pendants, copper, Bird, 1 hole, 30 x 32 mm, blank for enameling
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
