White square frame for lampshade, height and width 40 cm, for 38mm socket

Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14

Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27

Cable  black with E14 socket and switch, length 2 m, for the realization of a lamp

Cable  black with E27 socket and switch, length 2 m, for the realization of a lamp

Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27

Cable with foot switch, black, length 3.50 m, 250V power cord

Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14

Little Frame half-cone wall lamp 20x7x14,5 cm, made of corrosion protection epoxy resin, for E14 for decoration

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade

Pyramid Lampshade frame 40x15x30 cm, Armature square 4 branches anticorrosive epoxy, for E27

This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27