White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm

White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included

Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14

Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters

Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27

Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14

Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27

Little Frame half-cone wall lamp 20x7x14,5 cm, made of corrosion protection epoxy resin, for E14 for decoration

White Round Frame for Lampshade with feet, Height 72 cm and Diam. 30 for E27 Socket, 38mm

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27