Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 10 cm, Diam. E14 socket, 28mm
Contains: 1 lampshade 10x10 cm + 1 custom-made polyphane sheet
This lampshade frame is round in shape with 6 branches.
Dimensions: Height: 10 cm - Diameter: 10 cm
For an E14 28mm socket
It is Epoxy quality: a white anti-corrosion layer protects your carcass over time.
The frame is suspended from a rod when passing through the paint booth.
There is a small area that will not be covered with paint since it is placed on this support.
The round lampshade frame allows you to make a lampshade with sewn or gathered fabric or to stretch ribbons and thus create a lampshade surrounded by ribbons.
If you wish to paint it, we recommend spray paint to use after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Super adhesive tape, double sided translucent, Tacky, width. 12 mm, 5 meters
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Set of 25 mini clothespins, in raw wood, undyed, length 3 cm
Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Set of frames diam. 60cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 20 cm, Diam. E14 socket, 28mm
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Frame half-round wall lamp 25x25 cm, made of corrosion protection epoxy resin, for E27 for decoration
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
Rectangular shade frame 60 x 20 x 20 cm, straight square for E27 bulb
Pyramid Lampshade frame 40x15x30 cm, Armature square 4 branches anticorrosive epoxy, for E27
White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Suspension frame, 40 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
Frame half-cone wall lamp 24x7.5x16 cm, made of corrosion protection epoxy resin, for E27 for decoration
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
Pyramid Lampshade frame short 40x11x27 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
Frame, square wall lamp 30x30 cm, made of anti-corrosion epoxy resin, for E27 for decoration
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 10 cm, Diam. E14 socket, 28mm
