
Enamel powder, cold, opaque Efcolor, 25 ml, for cooking 150 ° C
Enamel powder, cold, opaque Efcolor, 25 ml, for cooking 150 ° C
Set of 5 Efcolor powder colors, 10 ml, green color chart, 2 sieves, for cold enamelling, baking at 150 ° C
Set of 5 Efcolor powder colors, 10 ml, green color chart, 2 sieves, for cold enamelling, baking at 150 ° C
Enamel powder, cold, opaque Efcolor, 25 ml, for cooking 150 ° C
Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will help the powder adhere better. Can be diluted if required – dilute and clean up with water.
Set 5 colors, Efcolor powder, 10 ml, primary color, 2 sieves, for cold enameling, baking at 150 ° C
Sieve nozzle, ø diameter 36 mm, each, for 25 ml Efcolor powder
Set 5 colors, Efcolor powder, 10 ml, soft color, 2 sieves, for cold enameling, baking at 150 ° C
Set of 5 Empty tubes with stopper, ø 20 mm high 50 mm, for 10 ml
Structured Powder Opaque Efcolor for cold enamelling at 150 ° C, 25ml
Set 5 colors, Efcolor Enamel powder, 25 ml, Dark color, total 125 ml, 2 sieves tops, for enameling, baking at 150 ° C
Set of 5 Efcolor powder colors, 10 ml, blue color chart, 2 sieves, for cold enamelling, baking at 150 ° C
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC.
Efcolor transparent powder for cold enamelling at 150 ° C, 25ml of colorless overglaze
Set 5 colors, Efcolor powder, 10 ml, dark color, 2 sieves, for cold enameling, baking at 150 ° C
Get started with low temperature enamelling and create amazing effects with this Efcolor Enamel Starter Set of 10 vivid colours. Efcolor Enamel is a low temperature resin based enamel powder which can be used on all metals, including silver and copper, along with glass, wood, porcelain and stone. These specially designed enamels harden at 150°c and will withstand temperatures up to 160°c, meaning they can be fired in a conventional oven without the need for a kiln. This fabulous product enables anyone to create enamelled designs with ease.
Efcolor Enamel is a low temperature resin based enamel powder which can be used on metals such as silver or copper, along with glass, wood, porcelain and stone. As with all Efcolor enamels, this enamel does not require the use of a kiln, as it can be fired in a conventional oven at 150°C. This fabulous product enables anyone to create enamelled jewellery designs with ease. Simply sieve onto your chosen backing, transfer to a firing plate, and fire in a pre-heated oven at 150°C for 3 - 5 minutes. Care must be taken when removing your piece from the oven as it will be hot. A Sieve Top may be useful for easy application of the powder. This resin based enamel is supplied in a 10ml pot.
These Sieve Tops help provide easy application of Efcolor enamels. They measure 20mm in diameter and are specifically designed for use with 10ml tubes of Efcolor enamel. Simply put the Sieve Top onto the tube of resin based enamel powder and use, for even distribution of powder over your item of jewellery or copper blank. Supplied in a pack of 20.
Set 5 colors, Efcolor powder, 10 ml, reds color, 2 sieves, for cold enameling, baking at 150 ° C
Set of 10 Empty tubes with sieve nozzle, ø 20 mm high 50 mm, for 10 ml
These Sieve Tops help provide easy application of Efcolor enamels. They measure 20mm in diameter and are specifically designed for use with 10ml tubes of Efcolor enamel. Simply put the Sieve Top onto the tube of resin based enamel powder and use, for even distribution of powder over your item of jewellery or copper blank. Supplied in a pack of 3.
Set 5 colors, Efcolor Enamel powder, 25 ml, primary color, total 125 ml, 2 sieves tops, for enameling, baking at 150 ° C