Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor Enamel is a low temperature resin based enamel powder which can be used on metals such as silver or copper, along with glass, wood, porcelain and stone.
As with all Efcolor enamels, this enamel does not require the use of a kiln, as it can be fired in a conventional oven at 150°C.
This fabulous product enables anyone to create enamelled jewellery designs with ease.
Simply sieve onto your chosen backing, transfer to a firing plate, and fire in a pre-heated oven at 150°C for 3 - 5 minutes.
Care must be taken when removing your piece from the oven as it will be hot.
A Sieve Top may be useful for easy application of the powder.
This resin based enamel is supplied in a 10ml pot.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC.
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven!
Enamel powder, cold, opaque Efcolor, 25 ml, for cooking 150 ° C
Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
Efcolor Low Temp Enamel Primer is a primer (adhesive) for Efcolor powder when applying to absorbent or awkward shapes, for instance a curved, carved or undercut surface. It will help the powder adhere better. Can be diluted if required – dilute and clean up with water.
Efcolor cooking support, with handle, for 1 piece of 10-50 mm, ø 83 mm
Sanding block, fine grain, 5 x 4 x 2 cm, polishing
Copper foil, 300 x 200 x 0.3 mm, for enamelling, decoration, creation
Lot of 10 small round copper pendants, 1 hole, ø 1.5 cm, thick. 0.8mm, for enameling
10x Copper Pendant Leaf, 1 hole, 47x13 mm x 0.8mm, for enameling
Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
All copper pendants are 0.8mm thick.
Made in Germany.
Set 5 colors, Efcolor powder, 10 ml, primary color, 2 sieves, for cold enameling, baking at 150 ° C
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC.
Set 5 colors, Efcolor Enamel powder, 25 ml, Soft color, total 125 ml, 2 sieves tops, for enameling, baking at 150 ° C
Low melt enamel powder, metallic, Efcolor, 25 ml, for firing at 150°C
Structured Powder Opaque Efcolor for cold enamelling at 150 ° C, 25ml
Set 5 colors, Efcolor powder, 10 ml, yellow color, 2 sieves, for cold enameling, baking at 150 ° C
Set of 5 Efcolor powder colors, 10 ml, pink color chart, 2 sieves, for cold enamelling, baking at 150 ° C
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
These Sieve Tops help provide easy application of Efcolor enamels. They measure 20mm in diameter and are specifically designed for use with 10ml tubes of Efcolor enamel. Simply put the Sieve Top onto the tube of resin based enamel powder and use, for even distribution of powder over your item of jewellery or copper blank. Supplied in a pack of 20.
Efcolor oven with accessories, for cold enamelling, works with candles
These Sieve Tops help provide easy application of Efcolor enamels. They measure 20mm in diameter and are specifically designed for use with 10ml tubes of Efcolor enamel. Simply put the Sieve Top onto the tube of resin based enamel powder and use, for even distribution of powder over your item of jewellery or copper blank. Supplied in a pack of 3.
Set 5 colors, Efcolor powder, 10 ml, summer color, 2 sieves, for cold enameling, baking at 150 ° C
Efcolor transparent powder for cold enamelling at 150 ° C, 25ml of colorless overglaze
Efcolor Enamel is a low temperature resin based enamel powder which can be used on metals such as silver or copper, along with glass, wood, porcelain and stone. As with all Efcolor enamels, this enamel does not require the use of a kiln, as it can be fired in a conventional oven at 150°C. This fabulous product enables anyone to create enamelled jewellery designs with ease. Simply sieve onto your chosen backing, transfer to a firing plate, and fire in a pre-heated oven at 150°C for 3 - 5 minutes. Care must be taken when removing your piece from the oven as it will be hot. A Sieve Top may be useful for easy application of the powder. This resin based enamel is supplied in a 10ml pot.
Set 5 colors, Efcolor powder, 10 ml, reds color, 2 sieves, for cold enameling, baking at 150 ° C
Set 5 colors, Efcolor Enamel powder, 25 ml, Summer color, total 125 ml, 2 sieves tops, for enameling, baking at 150 ° C
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.