Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Big Set of 3 XXL large Antique gold metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 white metal circles Diameter 55 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 60cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Boho dream catcher, diam 33 cm, White feathers, Wooden and jute beads, 85 cm long
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Black Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 big red metal circles, diam. 60 cm for lampshade, Epoxy rings Dreamcatcher