Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Transparent nylon thread for jewelry, diameter 0.15 mm, 100 m, resistance 0.9 kg
Transparent nylon thread for jewelry, diameter 0.45 mm, 100 m, resistance 9 kg
Double-sided satin tape, width 6 mm, roll of 50 meters
Lot of 12 White Rose Heads, Rosebud 35 mm to stitchSet of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of 10 rings, in beech wood, diameter 6,8 cm, for macrame, jewellery, pacifier
Set of 10 square wooden sticks, length 30 cm, diameter 0.8 cm, rods, sticks, macramé
Set of 10 rings in wood, diameter 4,8 cm, for macrame, jewellery, pacifier
Set of 5 old gold circles, Diameter 10 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 black metal circles Diameter 30 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 5 old gold metal circles, Ø 10 cm to 50 cm, epoxy rings for dream catcher, lampshade
wire thickness: 2.6 mm to 3.6 mm
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 2 large old gold circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher