Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
White Metal Circle of 12 cm for Shades, White Epoxy Wire ring for Dream Catcher
€1.43
Tax included
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
7 Items
Wire diameter: 2.6 mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
You might also like
White Metal Circle of 12 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
White Metal Circle of 18 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or...
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Antique gold Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Antique gold Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings...
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
16 other products in the category
White polyphane sheet 2 m x 0.25 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm,...
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings...
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for...
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Lampshade round clip clamp, diameter 12 cm and circle 18 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp...
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of 5 white metal circles Diameter 13 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large white metal circles Diameter 80 cm for lampshade, epoxy rings for...
Set of 2 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 white metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 white metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Red Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 2 large black metal circles Diameter 50 cm for lampshade, epoxy rings for...
Set of 2 large black metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Steel grey Metal Circle of 20 cm for Shades, Epoxy Wire matt silver ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 5 black circles, Diameter 10 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 black circles, Diameter 10 cm for lampshade, epoxy rings for Dreamcatcher
Tacky translucent double-sided super adhesive tape, width 24mm, 10 meters
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm