
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Wire diameter: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Boho dream catcher, diam 33 cm, White feathers, Wooden and jute beads, 85 cm long
Large XXL White Metal Circle of 100 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of 2 large XXL Antique gold Metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large white metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 5 steel gray metal circles, diam. 40 cm for lampshade, silver epoxy rings Dream catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream catcher
Set of 5 White metal oval 20x13 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 large Black metal circles Diameter 20 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher