This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
The round clips are designed to clip onto small round bulbs to make lampshades for chandeliers or wall lights.
For small round 45mm G45 bulb.
A round clip diameter 14 cm
A round circle diameter 20 cm
The circle is suspended from a rod when passing through the paint booth.
There is a small area that will not be covered with paint since it is placed on this support.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Super adhesive tape, double sided translucent, Tacky, width. 12 mm, 5 meters
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Set of frames diam. 50cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
White Round Lampshade base frame, Height and Diam. 20 cm, Diam. E27 socket, 38mm
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27
Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
Shade Carcass Conical 60 x 30 cm, 8-branch frame, anticorrosion epoxy, E27
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White square frame for lampshade, height and width 25 cm, for 38mm socket
Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket
Big Carcass Lampshade Drum shape of 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
