Tacky translucent double-sided super adhesive tape, width 24mm, 10 meters
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Set of frames diam. 25cm for lampshade, round rings epoxy white, for lamp holder 40mm E27
€9.40
Tax included
20 Items
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
SET-2213625-E27
20 Items
Data sheet
- Diameter
- 25 cm
- Color
- White
Specific References
You might also like
White polyphane Roll 15 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder...
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
White polyphane sheet 2 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of black frames diam. 50cm for lampshade, large round rings epoxy black, for lamp...
Set of black frames diam. 50cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder 28 mm E14
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder E14
Set of frames diam. 20cm for lampshade, round rings epoxy white, for lamp holder 28mm E14
Set of frames diam. 20cm for lampshade, round rings epoxy white, for lamp holder 28mm E14
16 other products in the category
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 28...
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 28 mm, E14
Antique gold Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
Antique gold Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 large XXL black Metal circles Diameter 100 cm for lampshade, epoxy rings for...
Set of 2 large XXL black Metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for...
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder...
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Set of 2 large antique gold metal circles Diameter 70 cm for lampshade, epoxy rings for...
Set of 2 large antique gold metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
White polyphane sheet 3 m x 0.80 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 5 white metal circles Diameter 13 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
White polyphane Roll 15 m x 0.80 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Set of 10 white metal circles Diameter 15 cm for lampshade, epoxy wire ring for...
To create dream catchers or for any other use.
Diameter of the thread: 2,6mm
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 5 white metal circles Diameter 18 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm