Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Thickness : 4,3 mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of 6 large white metal circles Diameter 35 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 large white metal circles Diameter 60 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 XXL large Antique gold metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 old gold metal circles, Ø 10 cm to 50 cm, epoxy rings for dream catcher, lampshade
wire thickness: 2.6 mm to 3.6 mm
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 4 large Golden metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 70cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Red Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 5 metal circles red, diameter 30 cm to 70 cm, rings for dream catcher, lampshade