
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Wire thickness: 4.3 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Double-sided satin tape, width 6 mm, roll of 50 meters
Drilled ball made of beech wood, diameter 45mm, hole 8mm
Drilled ball made of beech wood, diameter 70mm, hole 10mm
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Boho dream catcher, diam 33 cm, White feathers, Wooden and jute beads, 85 cm long
DIY kit, Macrame pendant light, colored wooden beads and white thread, 80 cm long
Lampshade ring set diam. 80cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Frame set from Ø 20 to 40cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 40cm, white epoxy, for E27 socket
Set of 2 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Big Set of 3 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Large Black Metal Circle of 60 cm for Shades,Epoxy Wire ring for Dream Catcher
Set of 5 metal circles red, diameter 20 cm to 60 cm, rings for dream catcher, lampshade
Set of frames diam. 50cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher