Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Set of 5 white metal circles Diameter 12 cm for lampshade, epoxy wire ring for Dreamcatcher
€6.90
Tax included
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
4 Items
Wire diameter: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
L-2213512-5
4 Items
Data sheet
- Diameter
- 12 cm
- Color
- White
Specific References
You might also like
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White Metal Circle of 12 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
White Metal Circle of 15 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or...
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 5 white metal circles Diameter 5 cm for lampshade, epoxy wire ring for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
16 other products in the category
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher
Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher
Set of 5 white metal circles Diameter 20 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings...
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Small White Metal Circle of 7 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Set of 2 large black metal circles Diameter 90 cm for lampshade, epoxy rings for...
Set of 2 large black metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
White polyphane sheet 2 m x 0.30 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Lampshade round clip clamp, diameter 12 cm and circle 18 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Large XXL black Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
Large XXL black Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm