
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Wire thickness: 3.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Set of 3 silver metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of 6 large white metal circles Diameter 35 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 XXL large Antique gold metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Boho dream catcher, diam 33 cm, White feathers, Wooden and jute beads, 85 cm long
Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 2 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 9 white metal circles Diameter 5 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher