Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Antique gold Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Antique gold Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Wire thickness: 3.2 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Lot of 12 White Rose Heads, Rosebud 35 mm to stitchSet of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 4 large Golden metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of frames diam. 60cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder E14
Set of 2 large white metal circles Diameter 70cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher