Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27

Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher

Set of 3 large old gold circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher

Set of black frames diam. 90 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Set of 2 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher

Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher

Set of 2 large white metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 28 mm, E14

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade

Set of black frames diam. 40cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27

To create lampshades, dream catchers or for any other use.

Wire diameter: 2.6mm

This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.