Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
White metallic square 30 x 30 cm for lampshade, White epoxy Dream catcher
White metallic square 30 x 30 cm for lampshade, White epoxy Dream catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 2 red metal circles, diam. 40 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 large XXL black Metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 XXL large Antique gold metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
This circular frame is made in France from fully joined metal wires. It is available in several diameters from 20 to 90 cm, providing a base for a pendant light or customised lampshade.
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 3 large old gold circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 5 metal circles red, diameter 20 cm to 60 cm, rings for dream catcher, lampshade
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm