Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Antique gold Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
To create mobiles, lampshades, dream catchers or for any other use
Wire thickness: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Metal circle for various creations:
Diameter: 20cm
Color: Golden
Material: Metal
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Lot of 12 White Rose Heads, Rosebud 35 mm to stitchSet of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 3 white metal circles Diameter 45 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Lampshade ring set diam. 80cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 5 metal circles red, diameter 30 cm to 70 cm, rings for dream catcher, lampshade
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 2 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 black circles, Diameter 10 cm for lampshade, epoxy rings for Dreamcatcher
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 XXL large Antique gold metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 old gold metal circles, Ø 10 cm to 50 cm, epoxy rings for dream catcher, lampshade
wire thickness: 2.6 mm to 3.6 mm
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!