
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of 2 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 28 mm, E14
Set of 5 large Black metal circles Diameter 20 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Large XXL White Metal Circle of 100 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of black frames diam. 80 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of 5 steel gray metal circles, diam. 40 cm for lampshade, silver epoxy rings Dream catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 red metal circles, diam. 20 cm for lampshade, Epoxy rings Dreamcatcher
Set of 3 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher