Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Big Set of 3 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Thickness : 4,3 mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of 6 large white metal circles Diameter 35 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 large white metal circles Diameter 60 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Set of black frames diam. 50cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Large XXL black Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
Lampshade ring set diam. 80cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large XL black Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 5 old gold circles, Diameter 20 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder 40mm E27