Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
White metal oval 15x10 cm for lampshade, Epoxy white for Dreamcatcher
€1.75
Tax included
26 Items
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
ON15
26 Items
Data sheet
- Diameter
- 15 cm
- Diameter
- 10 cm
- Color
- White
Specific References
You might also like
Double satin ribbon, width 6 mm, roll of 50 meters
Double-sided satin tape, width 6 mm, roll of 50 meters
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
DIY kit, Macrame pendant light, colored wooden beads and white thread, 80 cm long
DIY kit, Macrame pendant light, colored wooden beads and white thread, 80 cm long
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
White Lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
White Lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 White metal oval 20x13 cm for lampshade, Epoxy for Dreamcatcher
Set of 5 White metal oval 20x13 cm for lampshade, Epoxy for Dreamcatcher
Set of 25 rings, in beech wood, diam. 4 cm, for creative hobbies, jewellery, macrame...
Set of 25 rings, in beech wood, diam. 4 cm, for creative hobbies, jewellery, macrame and pacifier
White Japanese lantern with lace effect, diam. 35 cm, Paper ball lantern, to hang
White Japanese lantern with lace effect, diam. 35 cm, Paper ball lantern, to hang
16 other products in the category
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder...
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 10 white metal circles Diameter 15 cm for lampshade, epoxy wire ring for...
To create dream catchers or for any other use.
Diameter of the thread: 2,6mm
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for...
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Small white polyphane sheet, 2 m x 15 cm, self-adhesive on one side, 0.30 mm thick, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy...
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp...
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
White polyphane sheet 2 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
Set of 5 metal circles red, diameter 20 cm to 60 cm, rings for dream catcher, lampshade
Set of 5 metal circles red, diameter 20 cm to 60 cm, rings for dream catcher, lampshade
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of 10 white metal circles Diameter 5 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Lampshade round clip clamp, diameter 10 cm and circle 15 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.