Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 5 old gold circles, Diameter 20 cm for lampshade, epoxy rings for Dreamcatcher
To create mobiles, lampshades, dream catchers or for any other use
Wire thickness: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Metal circle for various creations:
Diameter: 20 cm
Color: Golden
Material: Metal
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 5 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 old gold circles, Diameter 10 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Red Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Set of 2 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 2 red metal circles, diam. 40 cm for lampshade, Epoxy rings Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 4 metal circles red, diameter 30 cm to 60 cm, rings for dream catcher, lampshade
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 9 white metal circles Diameter 5 cm to 18 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!