Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
Set of 5 metal circles red, diameter 30 cm to 70 cm, rings for dream catcher, lampshade
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Set of 5 White metal squares, size 10 cm to 30 cm, Epoxy rings for Dreamcatcher, lampshade
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream catcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher