
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Big Set of 3 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Thickness : 4,3 mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of 6 large white metal circles Diameter 35 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 large white metal circles Diameter 60 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Lampshade ring set diam. 80cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 4 metal circles red, diameter 30 cm to 60 cm, rings for dream catcher, lampshade
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 70cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher