6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
Wire diameter: 3.2 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
White Lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Antique gold Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Set of 5 black metal circles Diameter 30 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 5 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
Square Frame Set with feet, 30 cm for lampshade, Square epoxy white, for lamp holder E27
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of 5 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 70cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 28 mm, E14
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White metallic square 25 x 25 cm for lampshade, White epoxy Dream catcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.