Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 5 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Wire thickness: 3.2 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 5 large Black metal circles Diameter 20 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of black frames diam. 90 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 big red metal circles, diam. 50 cm for lampshade, Epoxy rings Dreamcatcher
White metallic square 25 x 25 cm for lampshade, White epoxy Dream catcher
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
Frame set from Ø 20 to 40cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 40cm, white epoxy, for E27 socket
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm