Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Big Set of 3 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Large XXL black Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of black frames diam. 50cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 large black metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
Set of 3 white metal circles Diameter 45 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 2 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher