Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 5 black metal circles Diameter 30 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 2 big red metal circles, diam. 60 cm for lampshade, Epoxy rings Dreamcatcher
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Red Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large antique gold Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher