Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Make jewelry, suspensions or DIY using these diamond-shaped wooden beads, to customize or leave half matt pink.
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder E14
Set of frames diam. 20cm for lampshade, round rings epoxy white, for lamp holder 28mm E14
Set of black frames diam. 60 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
White metallic square 25 x 25 cm for lampshade, White epoxy Dream catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 5 red metal circles, diam. 20 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 old gold metal circles, Ø 10 cm to 50 cm, epoxy rings for dream catcher, lampshade
wire thickness: 2.6 mm to 3.6 mm
Set of 4 metal circles red, diameter 30 cm to 60 cm, rings for dream catcher, lampshade
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Antique gold Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 5 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
White Lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Large antique gold Metal Circle of 90 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
