
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
Wire thickness: 3.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large white metal circles Diameter 70cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of frames diam. 20cm for lampshade, round rings epoxy black, for lamp holder 40mm E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Set of black frames diam. 70 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of 3 white metal circles Diameter 45 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 large white metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Large antique gold Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher