It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Small set of frames diam. 10cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Big Carcass lampshade "American" 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Set of 2 white metal circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 5 white metal circles Diameter 45 cm for lampshade, epoxy wire ring for Dreamcatcher
Set of 3 white metal circles Diameter 45 cm for lampshade, epoxy rings for Dreamcatcher
Antique gold Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Frame set from Ø 20 to 30cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 30cm, white epoxy, for E27 socket
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
