
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Set of 2 black metal circles Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Big Set of 3 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 metal circles red, diameter 30 cm to 70 cm, rings for dream catcher, lampshade
Antique gold Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
White metallic square 30 x 30 cm for lampshade, White epoxy Dream catcher
Set of 5 steel gray metal circles, diam. 40 cm for lampshade, silver epoxy rings Dream catcher
Large XXL White Metal Circle of 100 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large old gold circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm