Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Wire diameter: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
Set of 3 gold metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of 3 silver metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Black Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of 9 white metal circles Diameter 5 cm to 18 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 red metal circles, diam. 20 cm for lampshade, Epoxy rings Dreamcatcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of frames diam. 50cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Red Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 20 cm for Shades, Epoxy Wire ring for Dream Catcher
White metallic square 30 x 30 cm for lampshade, White epoxy Dream catcher
Large antique gold Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 white metal circles Diameter 30 cm for lampshade, epoxy wire ring for Dreamcatcher
Big Set of 3 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher