Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14
Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27
Big Carcass Lampshade Drum shape of 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Rectangular shade frame 60 x 20 x 20 cm, straight square for E27 bulb
Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
