White square frame for lampshade, height and width 25 cm, for 38mm socket

Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

Pyramid Lampshade frame short 40x11x27 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27

White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included

Little Frame half-cone wall lamp 20x7x14,5 cm, made of corrosion protection epoxy resin, for E14 for decoration

Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 20 cm, Diam. E27 socket, 38mm

Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27

White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included

Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade

Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14

White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm

Shade Carcass Conical 40 x 21 cm, 6-branch frame, anticorrosion epoxy, E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Lampshade base frame with Cut sides 32x15.5 / 40x22x30 cm, Oval rectangular frame, for E27

Cable with foot switch, black, length 3.50 m, 250V power cord

This lampshade carcass is spherical in shape with 10 branches.

Bottom diameter 45 cm
Top diameter 11 cm

For an E27 socket