Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27
Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket
Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
White Round Lampshade base frame, Height and Diam. 20 cm, Diam. E27 socket, 38mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
Drum Lampshade Carcass, heigh 35 cm, 6-branched frame in anti-corrosion epoxy, for E27
Little Frame half-cone wall lamp 20x7x14,5 cm, made of corrosion protection epoxy resin, for E14 for decoration
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm
This lampshade carcass is spherical in shape with 10 branches.
Bottom diameter 45 cm
Top diameter 11 cm
For an E27 socket
Frame half-cone wall lamp 24x7.5x16 cm, made of corrosion protection epoxy resin, for E27 for decoration
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27
