Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
€28.50
Tax included
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
CO50-DBH
Data sheet
- Frame shape
- Conical
- Frame shape
- Suspension, ceiling light
Specific References
You might also like
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with...
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion...
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion...
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion epoxy, for E27
Frame set from Ø 20 to 30cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 30cm,...
Frame set from Ø 20 to 30cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 30cm, white epoxy, for E27 socket
16 other products in the category
Round Frame, white, High. 35 cm and Diam. 45 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 35 cm and Diam. 45 cm, E27 socket 38mm, for lampshade
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with...
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy...
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
Small white polyphane sheet, 2 m x 10 cm, self-adhesive on one side, 0.30 mm thick, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White electrical cable with E14 socket and switch, length 2 m, for the realization of a...
White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
Lampshade Frame Bell with Collar 20 cm, Dome Structure with 10 Epoxy Anti-Corrosion...
Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Lampshade round clip clamp, diameter 8 cm and circle 15 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion...
Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy...
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
White polyphane sheet 1 m x 0.50 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27