White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Lampshade base frame with Cut sides 32x15.5 / 40x22x30 cm, Oval rectangular frame, for E27
Lampshade base frame with Cut sides 40x11/50x14xh.37,5 cm, Oval rectangular frame, for E27
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Rectangular shade frame 40 x 20 x 20 cm, straight square for E27 bulb
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included
Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14
Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27