Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14
Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Large Round Frame, white, High. 35 cm and Diam. 45 cm, E27 socket 38mm, for lampshade
White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm
Rectangular shade frame 60 x 20 x 20 cm, straight square for E27 bulb
White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm
Frame, Rectangle wall lamp 25x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Cable black with E27 socket and switch, length 2 m, for the realization of a lamp
Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27
Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 20 cm, Diam. E14 socket, 28mm
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14
