It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
Frame half-round wall lamp 25x25 cm, made of corrosion protection epoxy resin, for E27 for decoration
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
Create your own lampshades with this metal frame that will serve as the structure for your hanging lights. Cylindrical in shape, this lampshade frame is suitable for any kind of light creation, from kitchen to bedroom fixtures.
To give your lamp more structure and diffuse the light, we recommend using polyphane paper, which has one sticky side. This way, you can easily attach the paper or fabric of your choice, depending on the atmosphere you want to create in your room.
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Suspension frame, 40 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Shade Carcass Conical 40 x 21 cm, 6-branch frame, anticorrosion epoxy, E27
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 20 cm, Diam. E14 socket, 28mm
Cable with foot switch, black, length 3.50 m, 250V power cord
Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27