DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Large White Round Lampshade Frame, Height and Diam. 40 cm, diameter 38 mm Socket E27
€25.00
4 Items
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
You might also like
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
€33.00
White polyphane Roll 15 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€250.00
White electrical cable with E14 socket and switch, length 2 m, for the realization of a...
White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp
€11.00
White electrical cable with E27 socket and switch, length 2 m, for the realization of a...
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
€11.00
White square frame for lampshade, height and width 25 cm, for 38mm socket
White square frame for lampshade, height and width 25 cm, for 38mm socket
€23.15
Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket
Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket
€55.00
White polyphane sheet 2 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€35.00
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade
€47.00
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket,...
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included
€35.83
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
€30.83
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
€24.17
White polyphane sheet 3 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€52.50
16 other products in the category
Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
€66.00
White polyphane sheet 2 m x 0.50 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€30.00
Lampshade round clip clamp, diameter 8 cm and circle 15 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
€5.52
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy...
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
€13.50
Lampshade round clip clamp, diameter 14 cm and circle 20 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
€5.62
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
€24.17
Tacky super-adhesive, double-sided, translucent tape, 10 meters, width. 6 mm
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
€5.40
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy...
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
€22.00
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
€20.00
Lampshade round clip clamp, diameter 8 cm and circle 13 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
€5.50
Suspension frame, 45 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
This lampshade carcass is spherical in shape with 10 branches.
Bottom diameter 45 cm
Top diameter 11 cm
For an E27 socket
€31.00
Rectangular shade frame 60 x 20 x 20 cm, straight square for E27 bulb
Rectangular shade frame 60 x 20 x 20 cm, straight square for E27 bulb
€36.00
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
€22.95